Wednesday, June 15, 2016

Sold!!!!!! Rivendell bult Phil Wood Bontrager Fairlane 700C 36 spoke wheelset Sold!!!!!!

Update: Sold!

For sale is a beautiful hand-built wheel set purchased from Rivendell 12 years ago. Most of that time it has hung unused in my garage. Less than 2,000 miles easily over that time. Bontrager Fairlane rims (rear is asymmetrical), DT Swiss double-butted spokes, 135mm rear spacing. Elegant and strong field-serviceable hubs. Located in dry and warm southern California, so little to no use in rain.
For sale for $500, that's a complete wheelset for near the price of a single PW rear hub. Shipped in US via Bike Flights. Discounted to $450 for local pick up. Shipped from Redlands, CA 92373.
Tires NOT included.


Minor indexing on cassette body.




 Rear hub body.







Rear hub taken down with two 5mm hex wrenches.









Wear indicator shows very few miles.























Front wheel. Tires not included.



Monday, November 9, 2015

2015 Coffeeneuring Challenge 6/7

Old California.
This one was all about the ride! A 37 mile mixed terrain route, over the hills and through the woods. It was an absolute blast, and had a tail wind blowing down San Timoteo Canyon at 15 mph just coasting! Glad it was a tailwind today!

Here's the route: https://www.strava.com/activities/428389985 My favorite portion that made the ride all worthwhile was the mile 20.5-22.7 Woodhouse Rd. portion of it. Just fantastic back roads through the canyons!

And oh yeah, ended up with another macchiato (theme within a theme!) at Bricks and Birch near downtown Redlands. Very good cup, as always!

Coffeeneuring Challenge 6/7

The details:

  1. Bricks and Birch coffee
  2. 11/7/15
  3. Macchiato
  4. A GREAT ride ending up ending up at an unexpectedly busy shop. Good for them, love seeing these businesses thriving!
  5. https://www.strava.com/activities/428389985


Sunday, November 1, 2015

2015 Coffeeneuring Challenge 5/7

Dia de Los Muertos @ OAM

Getting it done! Had my first decaf in this series today as things got out of hand a bit. The plan was to ride to my kid's school carnival this afternoon, then swing by coffee on the way back. Well, life happens and we ended up driving there. So switched plans around and did some errandeuring on the way to coffee to make it a full loop. Stopped by the library, dropped off/picked up, then rambled over to the Olive Ave Market which was hosting a Dia de los Muertos festival this afternoon. We didn't get there till 4:30, hence the decaf. But it as a really good macchiato (sends to be a theme!) and the blocked street gave it a real carnival atmosphere. They were beginning to clean up and roll up the welcome mat, so got there just in time! All in all, a success!!!

Library stop


Dia de Los Muertos @ OAM


Coffeeneuring 5/7 decaf macchiato @ OAM

The details:
1. Olive Avenue Market
2. 11/1/15
3. Decaf macchiato
4. Pleasant meander about town, stopping at the library on the way in.
5. Worked to make it two miles!


Dia de Los Muertos @ OAM

Sunday, October 25, 2015

2015 Coffeeneuring Challenge 4/7

This was a fun one! Got out for a couple hours to bang around on my mountain bike. Riding on actual trails even!

A fun 20 mile ride, out my back door, and onto some great dirt. After that, dropped by Stell's coffee on the way home (mile 18) and picked up a Macchiato. And in the process learned that a Gibraltar is a Macchiato with a little more milk. Between that and a Cappuccino. Must get next time!

Starting here:

Oakmont Park

And ending up here:


20151025_124211
No room to complain there!

Details:
1. Stell Coffee & Tea
2. 10/25/15
3. Macchiato
4. 20 mile round trip, with caffeine factory at mile 18.
5. Better look at the specifics of it: https://www.strava.com/activities/420322983

Sunday, October 18, 2015

2015 Coffeeneuring Challenge 3/7

Combining CicLAvia with Coffeeneuring, what could be better?

Pics from the day, showing a good time had by all: https://www.flickr.com/photos/cyclotourist/albums/72157659629669808

By three in the afternoon, starting to get a bit tired after all those miles. And what should we find at Grand Central Market? G&B coffee purveyors! Small, unassuming stand, but some great coffee. Located at the west end of the market, right off the Hill St. entrance.

Coffeeneuring 3/8 #grandcentralmarket

The barista at G&B was really kind and accommodating, filling up five ice waters for us when I asked for the direction of a fountain. Have to recommend!

Ended up covering about 13 miles over four and a half hours, ate sliders, Thrifty ice cream, great coffee, finishing the day at In N Out. Success!!!

Details:
1. G&B Coffee
2. 10/18/15
3. Macchiato
4. 12 whole miles over 4.5 hours!
5. Better look at the specifics of it: https://www.strava.com/activities/415865553

Thanks L.A., it was a great day!!!

Saturday, October 10, 2015

2015 Coffeeneuring Challenge 2/7


Twenty three miles for some coffee!

Dirty mountain bike ride over the hills and through the woods.

Crafton Trail Summit


Ended up back in Redlands and went to Augie's Coffee. One of the most delicious macchiatos I have ever had!

Drank it down the alley at the Bike BBQ, where fun is always to be found!
A photo posted by @bikebbq on



So, to get the details in one place...

1. Went to Augie's Coffee, 
2. Oct 10, 2015 
3. Best macchiato ever! 
4. Augie's is about a mile from my house, and a lot of local rides start there. I instead ended there after riding the back way through Mentone and up the backside of Crafton Hills. 
5. 23 mile total there and back again.

Saturday, October 3, 2015

2015 Coffeeneuring Challenge 1/7

THIS!
Something always got in the way previous years, but I have high expectations for this year! Week number one involved a 20 mile RT ride up to Yucaipa to the White Rabbit for some Kona blend. Yummy stuff!
Ended up being too much to drink in the middle of a ride, and had to toss half of it though :-( Better stick to espressos from now on! 2015-10-03_03-47-21

The details:
  1. White Rabbit Coffee, Yucaipa http://www.yelp.com/biz/white-rabbit-coffee-co-yucaipa
  2. 10/3/15
  3. Kona blend coffee
  4. About 12 miles to get here. Steady climb up. Decently bike friendly. No actual racks, but plenty of railing to lean against.
  5. Stats: https://www.strava.com/activities/405603736

Sunday, January 4, 2015

WD-40 to the rescue!

My new to me bike is very well used, more than I thought at initial inspection. In addition to a good-sized dent on the downtube, the Shimano 6600 Ultegra brifters on it were working poorly if at all. I could sweep the main lever to raise to a larger-sized cog or ring, but the release lever barely worked. If I held it in just the right spot, it would drop down some of the time, and then only one (front) or four to six (back) gears. Really frustrated as my great purchase was starting to look like it was going to cost me some $$$

So I researched the repair options for sticking Shimano brifters, and the advice I came across in various forums said to douse them in kerosene or spray with WD-40. I chose the latter, and after spraying about 1/4 of the large bottle in them, am happy to report back it's shifting great, all except the 10th and final speed. I oriented the derailer so that it pulls up to the largest cog, but doesn't reach all the way to the smallest 12T cog.

Thanks interwebs!!!

Internet fixes my brifters!

Here's a good video showing the process, although I didn't take them off the bike:

Monday, October 6, 2014

Stolen Salsa La Cruz Cyclocross 57cm Bike

My awesome-fantastic Salsa was stolen this spring. No sights or sounds, I'm checking ebay daily, Craigslist both locally and nationally. Stolen Bike Registry, Bike Index, bike shops, pawn shops, coffee shops. So far no luck, although I'm holding out hope still!!! This is the posting on CL which summarizes the bike and built pretty well: http://inlandempire.craigslist.org/bik/4693740777.html

The serial # is LA57 M8091181. If anyone comes across it, please email me through this post, and contact Redlands Police Dept at (909)798-7681


Monday, January 27, 2014

How To NOT Be Challenged By Challenge Tires

Now with pictures (I hope)!

Challenged by Challenge by cyclotourist

I am incredibly happy with the Challenge Eroicas I purchased last year. Great rolling tires and no punctures or defects to date. That's high praise for any such top shelf tire which often seem to skate the thin line between performance and durability.

I did have a HUGE problem mounting them. It ended up taking me several days, using successively larger tubes to form the tires.

Apparently there is a much better procedure, that was sent to me from Chris from Challenge. It follows below:

Due to the construction of our handmade open tubulars, they tend to lay flat and tight on the rim. Once installed and a tube inflated, they take their shape and stretch a little making future removal and installation easier. It’s that first installation that can be a real pain depending on the rim.

Working with the folks in our factory we found another method for installing these tires. Rather than pushing everything on from one side, as is traditional, follow these steps:


1)      Place the rim in the center of the tire



2)      Center the rest of the tire over the rim



3)      Install one side of the tire




4)      Install the tube from the other side
5)      Install the remaining side of the tire

We’ve found this to help immensely with tighter fitting tires like our handmade open tubular tires.



Doing it that way should help you hurry up and get out the door in order to start doing some of this:

Friday, January 10, 2014

Schwalbe Thunder Burts... I like 'em!


Schwalbe Thunder Burts have become my favorite tire!

They float over soft stuff


Perfect on hard-pack (Strada Rossa there, people!)


And they roll great on asphalt!


Although labeled 2.10", the 27.5"/650b/584 tires measure 49 mm wide at casing, and 50 mm at knobs on 28mm wide Velocity Blunt rims. So more like a 2.0" tire."

These are the dual-compound tires, not the EVO tires. I bought them a German retailer as they met my needs perfectly. EVO line would be nice to run tubeless, but that's the only downside to the dual compound in my opinion.

These are perfect all-around tires for my dry conditions. I ride about five miles to the trail heads on streets, so want something that does good on the road. But then I need it to dig in good in the dirt. I have been running Kenda Slant Six tires on my 29er, but will probably switch to these there as well!!!

Tuesday, November 26, 2013

Religious Conversion

Untitled

That's 700C to 650B for all y'all. I recently bought a used Salsa La Cruz specifically with this project in mind. With disc brakes and a high-ish (68mm drop) bottom bracket, it looks like the perfect bike to do a quick and easy conversion on. Inspired by this, http://www.bikeman.com/bikeman-blogs/650blog/1888-salsa-la-cruz-650b-conversion I knew I was good to go.

I found a used Velocity Blunt wheelset on Craigslist, and was able to get a pair of Vee Rubber Speedsters (I know, hard to make out the name on them) from my friend Mike. So far the entire investment is under $1000 which is where I wanted to be in this experiment.

You can see the comparison between the two wheelsets below. The 700C is about 10mm taller at the top. Five mm at the axle. Imperceptible ride height difference.

Salsa La Cruz 650B Conversion


But what a difference in ride quality! Riding off-road with the 700X31C stock tires was miserable on this bike. I don't know if it was the tire or an extremely rigid fork, but my hands and arms would ache after riding. Really disappointed about that. I might play around with some different 700C tires and see if it can be improved. Probably some SOMA C Lines in the future.

The Vee Rubber Speedsters measure 47mm, and are slower on the road, but excel in the dirt. Especially on hardpack fire road type riding that I do a lot of here in Inland Southern California. They're not so great on singletrack, but everything in life is a compromise! The hand pain I mentioned above is eliminated. The bike just flies over irregularities in the trail now.

There is a weight penalty with the 650B wheels though.  About 225grams/8oz. per wheel. That's with disc and skewers installed. The 700C does have a lighter disc. Hubs are both XT M756, 32 butted spokes, Velocity Blunt 650B and Salsa Delgado 29er rims.

I'm going to raise the bars and bring them closer, as a stretched out road position doesn't work so well in the dirt. Other than that and maybe eventually putting some knobbier tires on, this bike is a dream to ride in the dirt!

One final look:

Salsa La Cruz 650B Conversion

Monday, November 4, 2013

Travelling with friends

Travelling with friends by cyclotourist

Travelling with friends, a photo by cyclotourist on Flickr.
Just noticed that these are the stills used in this great video:

Wednesday, October 16, 2013

Coffee Outside

Coffee Outside by rperks1
Coffee Outside, a photo by rperks1 on Flickr.

The perfect outing!

Tuesday, September 24, 2013

Resist Nomads - 300 miles in

Untitled by cyclotourist
Untitled, a photo by cyclotourist on Flickr.
I reported to the internet earlier on these, and stand by my very positive initial impression. These are some great tires. Actually fantastic tires when you consider the street price they go for. If your bike can fit them, go for it! The float over sand, hook up for climbing, are incredibly supple for bump absorption without slowing you down. All good!

Well, yes, almost all good I suppose. The only downsides are potential clearance issues (they are 41mm wide on 23mm rims), excessive squishiness at low pressure, and something I never experienced before, produce increased wheel flop.

The first two negatives are pretty obvious, but the third was unexpected. It wasn't awful, just a lack of stability from the extra mass or circumference (or both!). This caused some slight handling issues that I didn't really like the feeling of. I didn't have this problem with the Ritchey Zeds of the same size, so don't know why it was pronounced with these tires. Maybe because the knobbies on the Zeds change the feel so much that wheel flop isn't even noticed?

Anyway, these are great tires, go out and buy some!

Monday, July 29, 2013

Ramble On!

Looking for a new bike? You could do worse than this one! Seriously, it's a damn fine bike, made in the States, designed by good people (Rob). Something to consider at least!


http://oceanaircycles.com/2013/07/25/why-a-rambler/

Why A Rambler

The Rambler is a true Cyclotouring bike, steeped in traditional French design, but brought forward to work with modern components and fittings.  It is the kind of bike that once dominated the market, but went away as racing came to the forefront.
7.25 blue GP WP-1140094
As we, the cycling tribe, move back to a cycling style that is more practical, able to function as transportation, take the load off our back, yet handle well and with a lively ride, the Rambler is there to fill that need.
The larger market is slower to move, has longer design cycles due to their economic scale, and may have generally different motivations.  I decided it was time to take my dream bike, and bring it to the market as a fully developed product and the Rambler was born.  In many ways it is unique in the market, the only production bike of its kind.  All of the details are there to build out a functional sport bicycle, that also serves as practical every day transportation.
Rambler Specs:
  •  TIG welded, double butted CroMo tubes, custom matched to the frame size for optimized performance.
  • Room for 42mm tires and fenders on all bicycle sizes
  • Designed with the provision for Paul Racer brakes, mounted with braze-on bosses.  These provide unparalleled power and modulation in a rim brake.
  • Paul Racer brakes are included in the frame set package.
  • Double eyelets for rack and fender mounts at the front and rear dropouts.
  • The fork has an investment cast crown with cast and machined rack mounting bosses, with provisions for small upper and low rider racks, & fenders.
  • Lighting wire guides on the right fork leg. Reinforced entry and exit ports for internal routing of lighting wires, from front to rear of the frame.
  • Columbine Quickchainger braze-on, for easy rear wheel changes without having to touch the chain.
  • Braze-on fender mounting points placed so installation is simple and results in even fender line.
  • 130mm rear spacing to work with modern road bike components.
  • Color options: American Blue , Orange Soda and Sunflower Yellow
Partnering with an US engineering and fabrication team, the Rambler delivers on all levels of build accuracy, quality, hand-built craftsmanship, as well as looks and performance.  Unique in the marketplace, it serves as the backbone for the custom-built bike you have been dreaming of.
7.25 Y Rambler2 WP-1100711Ocean Air Cycles is the embodiment of my passion for cycling in a form that shares what I know to be a better alternative with you.  It is my work, and my dream, to apply my skills as an engineer and an entrepreneur to deliver a bicycle that can change the way people see local transportation and recreation.  Using the Rambler as a tool for travel, transport, running errands, getting to work, etc.  Getting out and around under your own power will transform you, your family, and community.  Having the best tools available will make the transformation more lasting.  Adding to the function is color, function with flair, because color choices make thing more fun
7.18 email -1140196
Our first large production run of Ramblers is currently in the powder coating phase.  They will be going final QC and prep over the next two weeks, then distribution begins.  I need your help, spreading the word, or better yet buying a Rambler of your own.  You can start with a frame set and build up your own, or we can facilitate custom builds for your ready to roll custom dream bike.  You can click-through any of the Rambler links or photos in this post to place your deposit today, reserving you place in this batch.  The next run will not be here until next Spring, and this is your chance to get rolling before Summer passes by.
7.25 blue bch WP-1010362Do not hesitate to contact us with any questions, we will make sure you are getting exactly what you want.
We are in this for the long haul, but can not do it without your support, Thank you.  We provide the tools, but you make the wheels go round and round.

Wednesday, July 24, 2013

Sold --> Co-Motion Double Espresso Tandem For Sale <-- Sold

This great tandem has been sold, thanks for looking!!!

Pictures below. The Double Espresso was Co-Motion's beautiful go-fast tandem. And it's best named tandem ever! It has extra marathon style lateral supports to reduce frame flex from a powerful team. The frame is beautifully fillet brazed and has an amazing deep metallic garnet paint. Made in Eugene, Oregon. Like most tandems, it has low miles on it. Probably ridden at most 20 miles per year over the last 10 years, and then prior to that, probably less than 200 miles per year. I will guesstimate it has less than 3,000 miles on it.

Exceptional drivetrain built around Phil Wood and Shimano XTR components. There is no need to change any of the drivetrain components out on this.

Fit was designed to get bars level with a 79cm seat height, although seat is lower than that as pictured.  A long and steep stem was used to accomplish that. Easy to swap out if you want lower/closer bars. Frame geometry is designed to accommodate a wide range of riders and is flexible.

Paint is not flawless, but nicks have been touched up with close match. No dings/dents on any tubes. Wheels are fantastic and very true. Phil Wood hubs and bottom brackets are barely to the point of just breaking in.

Asking $1,250. Basing that on similar era Santanas, but asking more as it's a Co-Mo which was hand fillet brazed and all the Phil Wood drivetrain upgrades on it. Feel free to let me know if that's out of line.

Tandem is located in Inland Southern California, and for the cost of gas, delivery can be arranged anywhere between San Diego, Santa Barbara and Blythe. I can also ship, but don't like the option of it. It would need to be in two OS2 boxes, and will probably be around $200.

Geometry (all approx):
  • Front Top Tube (c-c): 59cm effective
  • Rear Top Tube (c-c): 69.5cm effective
  • Front Seat Tube: 55.5 (c-c)/59 (c-t) (tall extension)
  • Rear Seat Tube: 51 (c-c)/53 (c-t)
  • Wheelbase: 173.5cm
  • Chainstays: 44cm
  • Head Tube: 15.2cm
  • Stoker Stem: 12cm/10deg rise

Build:
  • Front Hub - Phil Wood
  • Front Rim - Velocity Dyad, 40h, double butted spokes
  • Rear Hub - Phil Wood Tandem hub (threaded for drag-brake)
  • Rear Rim - Mavic T217, 40h, double butted spokes 
  • Freewheel - Sunrace Seven Speed (13-28)
  • Bottom Brackets - Phil Wood
  • Front (Captain's) Handlebars - Specialized 44cm
  • Rear (Stoker's) Handlebars - 3TTT Form 42cm
  • Front Seatpost - American Classic
  • Rear Seatpost - Suntour XC
  • Brake Levers - Dia Compe 287 (rear) 287-V (front)
  • Front Stem - 12 cm/45 deg (approx), 1-1/8 quill
  • Rear (Stoker) Stem 12 cm/10 deg (approx)
  • Shimano Bar-End Shifters
  • Seats - Avocet M30/W30
  • Front Brake - Shimano XT V-Brake
  • Rear Brake - Shimano LX Cantilever
  •  Front Derailer - Shimano XTR FD M950
  • Rear Derailer - Shimano XTR RD M950
  • Crankset - Specilized (low Q) tandem 175mm/170mm 54/44/32 
  • Tires - Panaracer Pasela Tourguard 32mm (80% tread, sides drying out).
Extras:
  • Avocet 45tt Computer (works, needs battery)
  • Bullhorn stem (option for stoker)
  • 12cm original flat steel stem (quill is quite rusty)
  • Matching halves of Dia Compe 287/287V Brake Levers (NIB)
  • Suspension Seatpost (option for stoker)
  • Suntour Superbe Brake Levers
Co-Motion Double Espresso for sale

Co-Motion Double Espresso for sale

Co-Motion Double Espresso for sale

Co-Motion Double Espresso for sale

Co-Motion Double Espresso for sale

Co-Motion Double Espresso for sale

Co-Motion Double Espresso for sale

Co-Motion Double Espresso for sale

Co-Motion Double Espresso for sale

Co-Motion Double Espresso for sale

Saturday, May 4, 2013

Bike for Life

Great sentiment (but someone please break that bell for me)!

Monday, April 8, 2013

Resist Nomads - They Should be Part of Your Future Tire Plans

Resist Nomad

I've had these tires for one week, and have put on approximately 50 miles. And so far I love them. Very plush, low rolling resistance. These are marked as 700X45C and they measure 41mm on Sun CR18 rims. I didn't weigh them, but they're not heavy. They're a touch thinner than 35mm Paselas, so probably won't wear super long. Sidewalls feel a bit delicate as Paselas can be.

Resist Nomad

I immediately had to take them on a mixed surface ride in Ventura. Front pumped up to 30psi, rear 50. Zero flats, total float the whole time! Coming down a paved section, the low pressure slowed me down a bit as they felt "squishy" and shifting weight for corner transitions was a bit unnerving. Have had the same problem with underinflated 33mm Jack Browns.  But that was only five minutes of a seven hour ride, so not a complaint on the tire.

Untitled

The rest of the ride was typical Southern California fire road, and that's where these tires excelled. No flats as mentioned above, plenty of traction, very comfortable. No drama whatsoever.

wide view of the world

Coming back down the mountain on meandering asphalt felt very fast. I could tuck in and keep up with any of the other riders no problem. These definitely don't slow you down unless you want to be slow!

I saved the best part till last: These retail for less than $25!!! So if your bike can fit these, get out there and purchase a set! I'll report back after some miles have been put on, but I'm expecting good things!